论文标题:基于Motorola MC68HC08系列单片机演示系统的设计与实现
The Design and Implementation of the Demo System on Motorola MC68HC08 MCU
论文作者 张永峰
论文导师 王宜怀,论文学位 硕士,论文专业 软件工程
论文单位 苏州大学,点击次数 198,论文页数 62页File Size4147k
2004-04-01论文网 http://www.lw23.com/lunwen_20259512/ 单片机;LED点阵汉字显示屏;红外遥控;调试
MCU,LED Display Screen,infrared remote control,debugging
本文提出了基于Motorola MC68HC08系列单片机演示系统的设计方案，并对其加以实现。整个演示系统是在结合了已有的MC68HC908GP32 MCU在线编程系统的情况下设计的，主要实现了LED点阵汉字显示功能模块和红外遥控功能模块。 首先，论文对单片机的发展状况以及我国现在单片机教学情况进行了分析研究，阐述了制作该演示系统的意义，接着论文主体详尽的描述了上面提及的两个功能模块的实现过程，包括底层的硬件方案设计、芯片选型和对应模块的硬件驱动程序设计、PC机方控制程序的编制，还有针对这两个模块的演示课件制作。 最后，论文对整个演示系统制作过程中的硬件调试和软件调试进行了阐述和总结，还谈到了整个系统中值得改进的地方。
This paper puts forward with a kind of scheme on the demo system controlled by Motorola MCU and implement it. The whole demo system designs base on the MC68HC908GP32 MCU In-Circuit Programming system. This demo system implements two parts of function module, one is LED Display Screen, another is infrared remote control.First,the paper analyse the development of MCU and MCU teaching, explain the meaning of demo system.Then the paper studies how to implement two function modules,including design of the hardware, driver and demo software.Finally, paper summarizes the debugging of Implementation of demo system including software and hardware,refers to some need to improved.
|
